How to Scan a Contract on iPhone, Sign It and Send It Back

Scan a contract on your iPhone into a clean multi-page PDF, check every page is legible, add your signature and email it back in about five minutes.

by jmApp · Updated 2026-11-16

To scan a contract on iPhone, open the Notes or Files app, choose Scan Documents, and hold the camera over each page until it captures. Save all the pages as one PDF, check that every page is sharp and in the right order, add your signature with Markup, and email it back. For a 10-page contract, the whole job takes about five minutes once you have done it once.

The steps below cover the built-in tools, how to get a cleaner and searchable file, how to sign without printing anything, and the checks that stop the other side from sending the contract back to you.

What do you need before you scan a contract?

Most bad scans come from the setup, not the phone. Two minutes of preparation saves you a rescan.

  • A dark, flat surface. White paper on a dark table gives the scanner clear edges to detect. A white desk or a patterned tablecloth makes it guess.
  • Even light. Daylight from a window works best. Avoid a single ceiling lamp right above you, because your hand and phone cast a shadow across the page.
  • Pages out of the staple. A stapled contract curls at the corner, and the curl shows up as warped text near the binding. Remove the staple and put it back afterward.
  • Pages in order. Stack them face up, page 1 on top. If the contract has an annex or schedule, decide now whether it goes in the same file.
  • A clean lens. Wipe it on your shirt. A fingerprint smear makes small print look blurred, and contracts are full of small print.

If you need to sign by hand on paper, sign first, then scan. If you plan to sign digitally, scan the unsigned contract and add the signature later on the phone.

How do you scan a contract with the iPhone's built-in scanner?

Every recent iPhone has a document scanner inside the Notes and Files apps. It detects the page edges, straightens the image and combines pages into one PDF. Here is the Files route, which saves straight to a folder:

  1. Open the Files app and go to the folder where you want the contract, for example On My iPhone or iCloud Drive.
  2. Tap the More button (three dots in a circle) at the top of the screen and choose Scan Documents.
  3. Hold the iPhone flat above page 1, roughly 12 inches away, so the whole page fits with a small border around it.
  4. Keep still. When the yellow frame locks onto the edges, the shot is taken automatically. If it does not trigger, tap the shutter button.
  5. Check the thumbnail. If a corner is cut off, tap it, then drag the corner handles to the real edge of the paper.
  6. Place page 2 on the same spot and repeat until the last page is captured.
  7. Tap Save. The pages land in a single PDF, named something like Scanned Document.
  8. Rename it right away: press and hold the file, choose Rename, and type something useful such as Lease 14 Oak Street signed.

In Notes the flow is almost the same: create a note, tap the camera or paperclip icon (it depends on your iOS version), then Scan Documents. The scan stays inside the note, and you share it as a PDF from there.

How do you get a sharper, searchable PDF of a contract?

The built-in scanner is fine for a two-page agreement you send once. For contracts you will need again, such as a lease, an employment contract or a supplier agreement, two things matter more: legible small print and being able to find a clause later without scrolling through 20 images.

This is where a dedicated scanner app helps. Scan the contract with Expert Scan: point the camera at each page and it detects the edges, straightens and cleans up the shot, and puts all the pages into one multi-page PDF. It runs OCR in English and French, so the text in the PDF is selectable and searchable. You can search for termination or notice period and land on the right clause. Documents are named, dated and tagged automatically, and you can export the result as a PDF, JPEG or plain text by email, AirDrop, iCloud, Dropbox or Google Drive.

Here is how the options compare for a contract:

OptionMulti-page PDFSearchable textBest for
Notes app scannerYesLimited, depends on iOS versionA quick scan you keep with notes
Files app scannerYesLimited, depends on iOS versionSaving straight to a cloud folder
Dedicated scanner appYesYes, through OCRContracts you will search and reuse
Taking photos with the CameraNo, separate imagesNoAvoid for contracts

Whatever tool you use, zoom in on the scan before you send it. Read one line of the smallest text on the last page, usually the signature block or a footnote. If you can read it at normal zoom, the other side can too.

How do you sign a scanned contract on your iPhone?

You do not need to print, sign and rescan. iOS has a signature tool built into Markup.

  1. Open the PDF in the Files app.
  2. Tap the Markup button (the pen tip icon).
  3. Tap the + button and choose Add Signature.
  4. Sign with your finger on the screen. Turning the phone sideways gives you more room and a steadier signature.
  5. Tap Done, then drag the signature onto the signature line and resize it so it fits the box.
  6. If the contract asks for initials on every page, add a second saved signature with just your initials and place it on each page.
  7. Use the text tool to add the date and your printed name if the contract asks for them.
  8. Tap Done to save the signed PDF.

If you scanned with Expert Scan, you can also pass the document to its companion app Expert Sign and sign it on the spot.

One habit worth keeping: save the signed version as a new file and keep the unsigned scan too. If the other party sends back changes, you have a clean copy to start from.

How do you email the signed contract back?

Before you hit send, open the PDF one last time and run through this check:

  • Page count matches the original. A 9-page contract that arrives as 8 pages will be bounced.
  • Pages are in order and upright. A sideways page 4 looks careless on a legal document.
  • Every signature and initial is in place. Scroll through slowly. Missed initials are the most common reason a contract comes back.
  • The file name makes sense. Smith-Consulting-Agreement-signed-2-pages is better than Scanned Document 3.

Then send it:

  1. In the Files app, press and hold the PDF and choose Share.
  2. Pick Mail, or Gmail or Outlook if that is the account the contract came from.
  3. Reply in the same email thread the contract arrived in, so the other party can match it to their records.
  4. Write one or two lines: Please find the signed agreement attached, 9 pages. Let me know if you need anything else.
  5. Send, then check your Sent folder to confirm the attachment went through.

File size is rarely a problem for a contract. A 10-page scan usually comes out at a few megabytes, well under the attachment limits of common email providers, which tend to sit around 20 to 25 MB. If a very long contract goes over, share it through iCloud Drive, Dropbox or Google Drive and send the link instead.

Is a scanned or electronically signed contract legally valid?

In most everyday situations, yes. The US, the UK, Canada and Australia all have laws that generally recognize electronic signatures and electronic copies of contracts. In the US, for example, the federal ESIGN Act and state laws cover most commercial and consumer agreements.

There are exceptions, and they vary by country and state. Wills, some property transfers, documents that must be witnessed or notarized, and certain court or government forms may still need a wet ink signature or a specific process. Some employers, landlords and lenders also have their own rules about what they accept.

If the contract involves a lot of money, property or a long commitment, check with the other party or a lawyer before you rely on a scanned or finger-drawn signature. A short email asking Is a signed PDF fine, or do you need the original? settles it in most cases.

What mistakes make a scanned contract get rejected?

After scanning many of these, the same problems come up again and again:

  • Shadows over the text. A dark band across the top of each page, usually from leaning over the paper. Move so the light comes from the side.
  • Cropped edges. Page numbers or the footer get cut off. Leave a visible border around the paper when you shoot.
  • Separate image files. Sending 12 photos instead of one PDF forces the other side to rebuild the document. Always send a single PDF.
  • Missing the back of double-sided pages. If the contract is printed on both sides, scan the front and back of each sheet in order.
  • A signature that floats off the line. Zoom in when you place it so it sits on the signature line, not over the printed text.

Fix those five and your scanned contract will look as clean as the original. Keep a copy of the signed PDF in a folder you can find later, because the day you need to check a notice period, you will want it in seconds.

Frequently asked questions

Can I scan a contract on iPhone without downloading an app?

Yes. The Notes and Files apps both include a Scan Documents option that detects page edges and saves several pages as one PDF. A dedicated scanner app adds extras such as OCR for searchable text and automatic naming.

How do I add my signature to a PDF on iPhone?

Open the PDF in the Files app, tap the Markup pen icon, tap the plus button and choose Add Signature. Draw your signature with your finger, then drag it onto the signature line.

Should I sign the contract before or after scanning it?

If you are signing on paper, sign first and then scan. If you plan to sign on the phone, scan the unsigned contract and add your signature with Markup afterward.

Is a contract signed on an iPhone legally binding?

Electronic signatures are generally recognized in the US, UK, Canada and Australia for most everyday contracts. Some documents, such as wills or those needing a witness or notary, are exceptions, so check with the other party or a lawyer for important agreements.

Why does my scanned contract look blurry?

Common causes are a dirty lens, poor lighting, or moving the phone during the shot. Wipe the lens, scan near a window on a dark flat surface, and hold still until the capture happens automatically.

Keep reading

All articles →